²  DESCRIPTION

The OptoLyzer MOCCA CL is a high-performance automotive bus interface supporting CAN and LIN developments. The tool can be applied in different phases of the automotive system/ECU development cycle, from prototyping and implementation to analysis and verification.

²  FEATURES

Ø  Bus Interfaces:

Ø  6 × CAN (4 x CAN High-Speed, 2 x configurable as CAN High-Speed, CAN Low-Speed or Single Wire CAN)

Ø  6 x LIN

Ø  Configurable via the OptoLyzer Studio, Foundation Edition and K2L.Bus API

²  VIDEOS

²  USERMANUAL

²  DESCRIPTION

The OptoLyzer® MOCCA FD is a high-performance automotive bus interface supporting CAN FD, CAN and LIN developments. The tool can be applied in different phases of the automotive system/ECU development cycle, from prototyping and implementation to analysis and verification.

²  FEATURES

Ø  Bus Interfaces:

I.       2 × CAN FD (up to 5 Mbps, these two interfaces can also be configured as CAN High-Speed, CAN Low-Speed or Single Wire CAN)

II.      1 x FlexRay

III.    4 × CAN High-Speed

IV.    6 x LIN

Ø  Configurable via the OptoLyzer Studio, Foundation Edition and K2L.Bus API

Ø  Generic trigger input and output (12V TTL) for detailed debugging support

Ø  Relay (up to 5A load) for power cycle testing

²  VIDEOS

²  USERMANUAL

²  DESCRIPTION

OptoLyzer MOCCA compact is an automotive bus interface incorporating most of the current automotive buses. The device can be used for application tests, simulation and verification, as well as gateway applications. Connection to the PC is established via high speed USB 2.0. On the PC, a SW solution from K2L, a custom programmed application based on K2L's API K2L.Bus or a third party product can be used.

²  FEATURES

Ø  6 LIN interfaces

Ø  6 CAN interfaces (4 x CAN High-Speed, 2 x configurable as CAN High-Speed, CAN Low-Speed or Single Wire CAN)

Ø  MOST50 or MOST150 (optional)

Ø  S/PDIF coaxial input and output for audio streaming over MOST®

Ø  Analog audio input and headphone output for audio streaming over MOST

Ø  ECL trigger interface

Ø  FlexRay™

Ø  Ethernet standard interface with 10/100 Mbit/s for MEP traffic

Ø  Relay to switch external loads of up to 5 A

Ø  USB 2.0 port for client PC connection

²  VIDEOS

²  USERMANUAL