㈜Techways

Instrumentation solutions
Provide the best solution with advanced technical skills and know-how.

IPETRONIK

It's a specialized solution that helps you better measure automotive functional testing.

Major Business
  • Flex Ray

  • Embedded

  • Gateway

  • Simulation

  • Communication Interface

  • EMC

product Select
FlexCard PMC-II
Interface card

Article number: 3-V0550A01

The FlexCard PMC-II is a bus interface device for automotive bus systems in PMC design. The card's 8 bus interfaces can be configured for different bus systems via Physical Layer (FlexTiny II) slots.

PRODUCT INFORMATION 

The FlexCard PMC-II is a bus interface device for automotive bus systems in PMC design. The card's 8 bus interfaces can be configured for different bus systems via Physical Layer (FlexTiny II) slots.
 

ADVANTAGE 

> 8x exchangeable bus interfaces, PMC interface (PCI Mezzanine card)
> Physical Layer available for CAN, CAN FD, FlexRay, 100BASE-TX and 100BASE-T1
> Synchronous timestamp generation for all of the 8 bus interfaces (resolution 1 us)
> PMC-Adapter available for: PCI and PCIe
> Driver available for: Windows, Linux and Xenomai
> Numerous triggering options
> Switchable on-board bus termination
> Analysis software included

8x exchangeable bus interfaces, PMC interface (PCI Mezzanine card) 

Synchronous timestamp generation for all 8 bus interfaces (resolution 1 us)

FlexTiny II exchangeable Physical Layer slots

4x Binder 712 8pol connector

3,3 V and 5 V compatible PCI power supply, LEDs signal network status

Trigger- 2x in/out configurable

Configurable bus termination

Analyzing software “FlexAlyzerV2” included

Bosch E-Ray IP Core FlexRay controller

Bosch D_CAN IP Core CAN controller

Bosch M_CAN IP Core CAN controller

MorethanIP 10/100/1000 Mbps Ethernet controller

V2.1 A FlexRay protocol specification

V2.0 A/B CAN protocol specification

ISO 11898-1:2015 CAN protocol specification

Bosch CAN FD specification 1.0


Installation Windows 

SETP1

Start "FlexCard_Setup_S6V6A-F.msi". Installation details can be found in the enclosed installation instructions. 


SETP2

Update the firmware with the file "FlexCard_PMCII_S6V5-F.fwf" or "FlexCard_PMCII_1FR_4CANFD_S6V5-036.fwf". Also included is an installation instruction.

It is important that you update both parts (Windows driver and firmware) at the same time. The drivers require corresponding licenses, which are noted on the card.

* You can download related software in below link of manufacturer.


FlexCard PMC-II