㈜Techways

Instrumentation solutions
Provide the best solution with advanced technical skills and know-how.

STAR ELECTRONICS

It's a specialized solution that helps you better measure automotive functional testing.

Major Business
  • Flex Ray

  • Embedded

  • Gateway

  • Simulation

  • Communication Interface

  • EMC

product Select
FlexDevice-S
multifunctional bus control unit
Article number: 3-V0860A01

The multifunctional bus control unit FlexDevice-S supports the current and upcoming bus systems and has one variable interface, so it covers most of the application fields where bus interface

PRODUCT INFORMATION 

FlexDevice-S is the starter of the FlexDevice product familiy which is used and recognized by many car manufacturers and component suppliers in their automotive electronics development. The FlexDevice family provides manifold solutions for: 

> gateways between different automotive bus systems 
> bus interfaces 
> remaining bus simulation 
> signal manipulation 
> data logging 
> rapid prototyping 


ADVANTAGE

> ARM Cortex A9 dual core (800 MHz) with 1 GByte DDR3 RAM Up to 10 bus channels 8 hardwired bus channels
> 2*CAN-HS channels
> 2*CAN-FD channels*
> 1*FlexRay A channel (Self-Sync)* 
> 1*FlexRay B channel (Self-Sync)*
> 1*100BASE-T1 channel*
> 1*LIN channel
> 1 flexible FlexTiny3 Slot for additional bus transceivers (2*CAN- or 2*FlexRay- or 2*100BASE-T1- channels)
> Integrated WiFi module 
> Wakeup/Sleep mode support
> Startup <200ms possible
> Micro SD card slot
> IP20
> Temperature range - 40°C to + 85°C
* The base unit provides the bus systems CAN-HS and LIN. To use the bus systems FlexRay, CAN-FD or 100BASE-T1, additional licenses are required

Altera Cyclone V SOC (integrierte ARM Cortex A9 dual core CPU)

1 GByte DDR3 RAM

Three sub-D sockets for the bus systems

Up to 4 bus channels per sub-D socket

Supported bus systems:

Up to 4 FlexRay Controllers (Bosch E-Ray Cores)*

Up to 4 FlexRay channels (2 * Channel-A and 2 * Channel-B) available at the bus ports

In any case, 2 FlexRay cores can be internally connected (self-synchronization).

Up to 4 CAN-FD bus interfaces *

Up to 6 CAN-HS bus interfaces *

Up to 3 100Mbps Ethernet Bus Interfaces *

Wake-up/sleep support (wake-up possible via FlexRay or CAN)

1GBit/s Ethernet configuration interface

> Integrated 1Gbit/s Ethernet switch

Micro SD card slot

Four digital inputs/outputs, or four analog inputs (ADIO) available

* Different bus combinations are possible. Please contact us regarding your desired bus configuration.