The dAV-Cr-4K camera is used for visual and acoustic monitoring of the test target during EMC testing. It has a built-in mono microphone, among other things, and can be adjusted by buttons on the back of the housing or by remote control of the control room. 4K resolution enables high quality DUT evaluation.

Optical signal transmission and shielding housing make the camera ideal for EMI and EME testing.

● Full-HD (25/30 fps) camera system (40 GHz and >>200 V/m, << CISPR 25 CLASS5

● Unique “audio, video and remote over one fiber” system

● Scalable up to 40 cameras on one control/receive unit.

● Very easy setup and installation (plug and play without PC)

● No PC needed for live display.

● Maximum level of in-house development (HW+SW) and production allows complete flexibility to customers needs (connectors, mounting options,)

● Full compatible surveillance line cameras available for low-cost integration of amp

room/prep room surveillance

● Main functions locally and remote (receiver push buttons, SW or joystick unit) controllable

=> very low latency rates of less than 80 ms from sensor video output allows real time analysis of DUT behavior

● recording and/or streaming - flexible PC-less or PC-based

● Low-cost solutions without audio, LED or local remote available (Basic / Low price Line)

General data

Sensor : 1/1,8" 4K CMOS sensor (8,41 millions of effective pixels)

Zoom : 18x (f/1,61) optical, 12 digital

Resolution : 3840x2160p30

Opening angle : 58,5° (wide angle) to 3,7° (tele end)

Optical transmission

digital, FSMA multimode (62,5/125 μm)

Microphone

internal, mono

Power supply

External battery pack (2 included for continuous measurements)

NiMH-battery with 10 cells; 12 V, 4 Ah, approx. 8 - 10 h (standard)

2 different lengths of shielded cable (e.g. 0,4 m and 1,4 m)

Case : approx. 136 mm x 86 mm x 65 mm;

Aluminum case with rubber protectors

Weight : approx. 1000 g

or

shielded power supply (110 V - 230 V) for wall mount application

Case dimensions

approx. 135 mm x 80 mm x 80 mm incl. connectors and switches, aluminum case

Weight

approx. 800 g

Mounting

1/4" tripod socket at case bottom, other threads available