It's a specialized solution that helps you better measure automotive functional testing.
Vehicle Ethernet
Network Analysis
Simulation
Functional Test
Engineering Service
The most compact and practical interface to your 100BASE-T1 device.
Description
The USB
100BASE-T1 Converter from Technica Engineering allows you to expand your
PC/Laptop with an additional Network Interface Card with the in-built USB-LAN
chip and to interact directly with your 100BASE-T1 (a.k.a. BroadR-Reach ™) device with only one device. The power supply for the converter is
provided by the USB port.
Windows
and Linux drivers available. It uses the widely used micro-USB and one Broadcom
BCM 89811 phy.
Thus the
USB 100BASE-T1 Converter is the ideal solution for working quickly and
efficiently with the new 100BASE-T1 technology.
FEATURES
- Converts
Broadcom 100BASE-T1 100 MBit/s full duplex 1x unshielded twisted pair (UTP) to
USB-LAN
- Master/slave
configuration through a windows tool (Linux driver available)
- Power
requirement: 5V DC provided from USB 2.0
- Small size
device as portable solution
- Status LEDs
- Automotive MQS
connector included (100BASE-T1)
- Standard USB
Connector
- Size: 60 x 42
x 19mm