자동차의 기능 테스트를 보다 효과적으로 측정 할 수 있게 지원하는 전문 솔루션입니다.
주요 사업
Flex Ray
임베디드
게이트웨이
시뮬레이션
통신 인터페이스
EMC
FlexOpto
Opto converter
Article number: 3-V030-0P03
FlexOpto는 EMC 테스트를 위해 CAN, LIN, FlexRay 데이터를 광으로 변환해 주는 양방향 미디어 컨버터 입니다.
Article number: 3-V030-0P03
FlexOpto는 EMC 테스트를 위해 CAN, LIN, FlexRay 데이터를 광으로 변환해 주는 양방향 미디어 컨버터 입니다.
PRODUCT INFORMATION
FlexOpto is a bidirectional media converter which transmits electrical FlexRay, CAN or LIN signals via optical fibre. For an independent use, a high capacity lithium ion battery allows an operation up to 40 h without charging. The PCB design is optimized for EMC tests, emits very little noise and is unsusceptible against high levels of electromagnetic noise.
ADVANTAGE
> Complete EMC optimized design with best-in-class low emissions
> Best-in-class unsusceptible against noise
> Integrated battery, up to 40 h operation
> Supports WUP and symbols (CAS, MTS, ...)
> Integrated, switchable network termination with power resistors
TIMINGS | FLEXOPTO |
FlexRay pulsewidth distortion | ±2 ns at 10 m HCS |
FlexRay bit delay | 195 ns at 10 m HCS |
FlexRay TSS truncation | 145 ns at 10 m HCS |
CAN pulsewidth distortion | ±4 ns at 10 m HCS |
CAN delay | 275 ns at 10 m HCS |
LIN pulsewidth distortion | ±4 μs at 10 m HCS |
LIN delay | 12 μs at 10 m HCS |
