자동차의 기능 테스트를 보다 효과적으로 측정 할 수 있게 지원하는 전문 솔루션입니다.
주요 사업
분석
통신 인터페이스
계측
차량 시험
엔지니어링 서비스
CANmod.temp : 4채널 Thermocouple-to-CAN 모듈(온도 센서)
해당 thermocouple-to-CAN 모듈은 4개의 열전대(thermocouple)를 이용해 온도 데이터를 CAN bus 및 USB 통해 출력해주는 기능을 제공합니다.
Description
해당 thermocouple-to-CAN 모듈은 4개의 열전대(thermocouple)를 이용해 온도 데이터를 CAN bus 및 USB 통해 출력해주는 기능을 제공합니다.
해당 모듈은 모든 종류의 열전대 타입(B,E,J,K,N,R,S,T)을 지원하고 있으며 쉽게 병렬 연결 가능합니다.
사용자는 해당 제품을 차량 네트워크 혹은 CAN Interface와 같은 CAN bus 에 통합하여 사용 가능합니다. 예를 들면 사용자는 해당 제품을 CSS Electronics 사 CANedge 제품과 함께 사용 할 수 있습니다.
해당 제품에 열전대는 포함되어 있지 않습니다.
FEATURES
PRODUCT
CAN 통신을 이용한 온도 데이터 계측 지원
4개의 열전대를 통해 계측된 온도데이터를 손쉽게 CAN bus로 추가할 수 있습니다.
l High Speed CAN 버스(2.0A, 2.0B)와 사용 가능
l CAN ID 및 Baudrate, 메시지 주기 설정 가능
l 병렬운영 가능(8,12,16…채널)
l 5-26VDC 입력전원 지원
l 데이터 확인을 위한 DBC 파일 지원
l USB를 통한 실시간 센서 스트림 지원(Optional)
예제 영상 : 센서데이터 로깅/스트림
| GENERAL | |
| Functionality | The device supports 4 x thermocouples for outputting temperature sensor data via CAN bus and/or USB |
| Included | CANmod.temp module, USB dust cover (thermocouple sensors and mini USB adapter not included) |
| Firmware | Supports free firmware updates via USB for adding features |
| Configuration | Configuration files based on the popular open source JSON schema concept (similar to the CANedge) |
| Software | Free open source editor tool for easy device configuration (offline/online version available) |
| Safety | CE, FCC, IC and RoHS certified (see the Docs for certificates) |
| Warranty | 1-year warranty |
| Support | Free, fast & high quality support |
| Origin | Denmark |
| SENSOR (temperature) | |
| Channels | Supports up to 4 thermocouple sensors/channels (plus ambient temperature via cold-junction) |
| Module | Professional-grade MAX31856MUD+ precision thermocouple converter |
| Temperature Range | Supports a range of -210°C to +1800°C (depending on thermocouple type) |
| Formatting | The module conveniently outputs degrees celsius via automated edge linearization |
| Accuracy | Lab-grade thermocouple voltage measurement accuracy with cold junction compensation |
| Resolution | 1 degC resolution (in 1 CAN frame) and/or 0.01 degC resolution (in 2 CAN frames) |
| Note: The 0.01 degC resolution typically exceeds the practical probe accuracy | |
| Protection | Thermocouple inputs are protected against overvoltage conditions up to ±45V |
| Types | Supports thermocouple types B, E, J, K, N, R, S, T (via configuration) |
| Filtering | Line frequency filtering of 50Hz and 60Hz (via configuration) |
| Fault Detection | Thermocouple fault detection (open thermocouples, over- and undertemperature) is communicated via CAN |
| Cold Junction | ±0.7°C (max, -20°C to +85°C) cold-junction accuracy |
| DATA PARAMETERS | |
| CAN Signals | The module communicates temperatures and fault statuses (for a full list, see the Docs or DBC file) |
| Thermocouple temperatures: The degree celsius (degC) temperature of each thermocouple probe [5 Hz] | |
| Ambient temperature: The ambient temperature measured via internal cold-junction [5 Hz] | |
| Faults: Status of each thermocouple sensor [5 Hz] | |
| CAN BUS | |
| Channels | 1 x CAN channel |
| Modes | The device can either broadcast the data onto the CAN bus - or provide it on-request |
| Standard | ISO 11898: Compliant with CAN (between 5K and 1 Mbit/s baud rates) |
| Identifiers | Compliant with CAN specifications 2.0A (11-Bit ID) and 2.0B (29-Bit ID) |
| Termination | Termination can be toggled via switch below DB9 connector |
| Retransmission | Retransmission of frames that have lost arbitration or been disturbed by errors |
| Transceiver Protection | Protection: +/- 25kV HBM ESD, +/-12kV IEC ESD, +/-14 V bus fault, short circuit |
| Common mode input voltage: +/-12V | |
| TXD dominant timeout (prevents network blocking in the event of a failure) | |
| CONFIGURATION | |
| Bit Rate | Select between standard bit rates (5K to 1M) or use custom bit-timing |
| Enable/Disable | Individually enable/disable the CAN message |
| Identifier Customization | Individually configure the CAN ID (11-bit or 29-bit) |
| Push/Poll Mode | Individually configure 'trigger' modes for the CAN messages (push or poll) |
| Frequency | Individually configure prescaling of the CAN message frequencies to lower rates |
| Thermocouple Type | Specify the thermocouple type for each channel (e.g. Type K, Type J, ...) |
| Line Noise Filtering | Select rejection of 50 Hz (EU) and its harmonics or 60 Hz (USA) and its harmonics |
| ELECTRICAL | |
| Input Supply | +5V to +26V DC via the DB9 connector (standalone/add-on mode) or |
| Alternatively power via USB (for updating firmware/config or for streaming data in real-time) | |
| Power Consumption | Extremely low (<1W) - no risk of battery drainage |
| Protection | Reverse voltage protection on CAN-bus supply |
| Transient voltage event protection on supply lines | |
| MECHANICAL | |
| Enclosure & Weight | Compact aluminium enclosure: 52.5 x 70.0 x 24.5 mm (L x W x H), 80 grams |
| Connector (Front) | 1 x Standard D-sub 9 (DB9) connector |
| Connector (Back) | 4 x miniature thermocouple female connectors |
| Pin-Out | See the product manual for the DB9 connector pin-outs |
| USB | Standard mini USB connector for config/firmware updates and streaming (USB cable not included) |
| LEDs | Module status via 3 external LEDs: Power, CAN bus, Memory |
| Temperature | Operating temperature (CANmod.temp module): -25degC to +70degC |
| IP Rating | IP Rating 40 |
| Mounting | Module can be mounted via e.g. rugged double-sided tape, zip-ties or a mounting bracket |
| IP Rating | IP Rating 40 |
| Mounting | Module can be mounted via e.g. rugged double-sided tape, zip-ties or a mounting bracket |
| GPS antenna | u-blox ANN-MS-0-005 (SMA plug, 5 m cable, magnetic base, -40 to +85 degC, 48 x 40 x 13 mm) |
