자동차의 기능 테스트를 보다 효과적으로 측정 할 수 있게 지원하는 전문 솔루션입니다.
▶Measuring unit for measuring currents and voltages of AC- or DC-signals.
▶The CHARGE-MONITOR is installed between charge station and vehicle or between the mains and the charging station.
▶The CHARGE-MONITOR disposes about the following connection options which could be configured individually:
• CEE32 für 1- oder 3- phase-measurements (32 A)
• Mennekes Europa
• CEE125 for 1- oder 3-phase-measurements (125 A)
• CCS/Combo1 USA
• CCS/Combo 2 Europe
• GB/T AC China AC
• GB/T DC China DC
• CHAdeMO Japan DC
▶Measuring speed is configurable individually. Current and voltage can be measured simultaneously up to 16 kHz.
▶Output of measuring values on a 7-inch-display and/or via CAN-interfaces.
▶Following measuring modes are available:
• DC-measurement: I_instantaneous, U_ instantaneous, I_charge, I_discharge, I_total,
• AC-measurement: I_ instantaneous, U_ instantaneous.
▶The measured values may be used for calculating the following values:
• cos φ and P_active power,
• electric work.
These values can be pictured on the display or transmitted via CAN-interfaces.