The Capture Module 1000 High is used to capture the traffic with 12 ports, up-to 6 point-to-point 1000BASE-T1 connection. Using 40 ns resolution hardware time stamp and highly deterministic latency times, AVB/TSN traffic remains synchronized and can be accurately analyzed. For the high amount of data, both Standard Gigabit Ethernet, as well as SFP+ interfaces provide enough bandwith for the uplink.

Several devices can be used on the same setup whenever more 1000BASE-T1 ports are needed, and when other IVN technologies are present, the in-built-synchronization using 802.1AS allows for simultaneous use with the other “IVN2Eth Capture Modules”.

Many additional features make this device appropriate for general-purpose testing.

FEATURES

 - 6 x Link Lines 1000BASE-T1 (12 Ports)

 - Technically Enhanced Capture Module Protocol (time stamping…)

 - Configure easily via webserver

 - Network Time Synchronization (802.1AS) - allows to synchronize multiple 100 High or any other "Capture Module"

 - Cascading and synchronization of multiple devices

 - Source Timestamping with 40 ns resolution

 - High Speed Startup

 - Startup Buffer

 - Output Traffic Shaping

 - AVB/TSN Capture capable

 - Time-Aware Injection

 - Rotary Switch for manual configuration of the device´s IP-Addresses (Gbit - RJ-45)

 - Wakeup capable

 - Extended Power Mode for Car integration

 - Robust stainless-steel case

 - Size: 186 x 130,4 x 32,5 mm.